DGREC52 12 Volt Small Electric Lift Cylinder for Massage Chairs and Medical Equipment

Technical Data

DGREC52 Electric Lift Cylinder for Massage Chairs and Medical Equipment technical data

Product SeriesDGREC52
Screw lead / pitch (mm)510
Max. Power of Motor (W)400
Max. Rated Thrust (N)200
Max. Speed (mm/s)250250
Rated Driving Torque (N.m)0.20.4
Max. Ball Screw Diameter (mm)1212
Rated Dynamic Load of Ball Screw (kgf)661642
Max. stroke (mm800
Axial Backlash (mm)0.02-0.050.02-0.06
Lead Error Every 300mm (mm)0.0230.023
Repeatability Accuracy (mm)0.020.02


  1. If you need to know the ball screw life, please contact customer service for detailed consultation;
  2. The max. thrust and the max. speed can not be reached at the same time. Different motor and gear boxes will be used.
  3. If the Max. stroke exceeds 500mm, it is recommended to add a guiding device;

Note: If you require beyond the specification chart above, please contact us directly, we can able to customize according to customers’ requirements on the load (up to 20 ton), speed(up to 2000mm/s) and stroke (up to 2800mm).

Motor Selection List

DGREC52 Electric Linear Actuator Motor Selection List

Product SeriesDGREC52
Flange Size of Optional Servo Motor Series (mm)40/ 60
Flange Size of Optional Stepper Motor Series (mm)42/ 57
Flange Size of Optional Gear Box Series (mm)60


1.DGR electric cylinder servo motor brands include Panasonic, Mitsubishi, Yaskawa, Delta, Syntron, Motec, and Tuoda;

  1. DGR electric cylinder stepper motor brands include Japan Samsr, Leadshine, MOONS’, etc;
  2. The DGR electric cylinder gear box brands include Nidec-Shimpo, Taiwan KunTai, Taiwan Li Ming, and Shanghai Jinmo;
  3. The cylinder can be equiped with a motor or gear box, and the motor brands and gear box brands can be designated by the customers, please kindly contact our sales for more detailed information;

Low cost servo linear actuator

Model Code

DGREC52 12 Volt Small Electric Lift Cylinder  model code:

Economical electric cylinderBore/sizeLead
Rated speed
 Rated load
Motor mounting

Inline mounting:I

Parallel mounting:U



Gear Ratio






Click here to add your own text